Posts Tagged ‘DIY’

1Oct

So here is the project guitar for which I ordered parts. It is no where near done. I think it has about a month of work on top of the 2 months its been in manufacturing the wood and such. The neck was custom made to my specs. The body was also custom made, but I just selected it.

This is being designed to get the richest tone possible in the ultimate shred type guitar. I already have jazz/rock/blue type guitars along with acoustic and classical and I was in the mood to get one that would be perfect for shredding. So here we are.  At the very least checkout the scalloped fret board it is awesome!

Share
14Jul

I am writing this post for one of my friends who was trying to decide what he needed to make his own computer. I decided I would help him out, and also help everyone who has this same question. Below I will list out some parts:

  • Case
  • Motherboard
  • Processor
  • Memory (Ram)
  • Power Supply
  • Extra Fans/Cooling
  • Hard Drive
  • Optical Drives
  • Video Card (if wanted, but is a very common add-on with most systems)

Now this is the very basic of any system. I included video card in there because, although it is an add-on, many people who make their own computers will buy a video card since the main factor is power at an affordable rate and this is needed for high end games.

So you have some options with everything. My best advice is to go to www.newegg.com, and read the user reviews before buying anything. Let us start with the case. A case is not just to have a pretty exterior. In fact if you are on a budget you would most likely want a very plain case. Many cases also come with power supplies and many come with fans. If you are trying to build a custom machine that has very high end specs you may want to steer clear of all in one solutions for your case since the power supply may not be enough to handle everything. I would recommend buying a case under 70 dollars. If you are really on a budget I would say somewhere from $30-$50 dollars.

Now the motherboard is a whole different beast. This part and the power supply are the most dependent on the knowledge of what you need. To select a motherboard you should be aware of what type of processor you want and what type of video card you need. If your motherboard doesn’t support them there is no way you will be able to make the processor or the video card fit on the board. In recent years there have been many many on board device attached to mother board including a NIC card, integrated video, usb, audio, etc. In past you would need to buy these all separately. If you are on a budget you may want to consider buying a motherboard that many features built into it especially if you aren’t playing high end video games.

The processor is the brain of your computer. Now a days you definitely at least want a dual core processor. I currently have a core 2 quad in my computer and that ran about $300.00 back in September of 07. It is a beast but I really doubt I have ever used more than 2 cores, which is a disappointment. The speed and amount of cores is really dependent on what sort of applications you are running. I wouldn’t doubt that my good ol’ quad core has hit about $200.00 at this point so if you are running music editing, video editing, photo editing, some high end games the quad core might be right up your alley. Why not buy it? We know that in the future people will take advantage of it. If you are on a budget then get a dual core processor under a $100.00 that has a good review. Also if you buy an Intel processor I would also recommend getting a new heat sink fan (the fan that comes with the processor, also known as HSF) because it is very loud and very obnoxious.

Ram is the most overestimated part of the computer. People think that to speed up their computer they need to through more ram. Well this is not the case obviously because all of those who have done so will tell you the performance increase is usually negligible. Ram is useful for editing software, video games and increased multitasking. The idea is the more you can rely on your ram, the less you need to rely on your (in comparison) slow hard drive to store page files. Speed is important here, but to be honest just get any decently fast ram that will fit in the motherboard. If you are running vista don’t even think about getting less than 2gb.

A power supply… This is pretty straight forward. Just see how much power you need from all your devices add it up and then get a power supply according to that. Also consider that you may need so more power for future cards or devices you may add. My current Power Supply Unit (PSU) is 700 watts.

Drives: Hard Drives and Optical Drives are a dime a dozen. Get whatever you want. The only thing I should mention is that if you are getting a scsi hard drive and want windows XP make sure to also buy a disk drive so that you can load the Intel Hard Drive Matrix drives (or something along those lines) while you install XP or else XP will not recognize the hard drive. You also need to set some other things up in your bios. I wen through this grief on my laptop. I just played with the settings in my bios related to my hard drive type and the loaded the drivers via F6 as the windows installer started.

Video Cards, well this is the part of the computer that people would call their baby. Do whatever you can here. Video cards are expensive, and you may want to get the cheapest one now that will work with all games currently out at medium to high settings, but in about a year won’t work with newer games past medium on the video settings. You may also consider buying the most expensive one which will last on higher settings for about 2-3 years before requiring an upgrade. Then again there is such a thing called SLI now. SLI lets you install 2 or more video cards (some motherboards have quad SLI now apparently) and run them at the same time to increase performance.

Now since we have all this amazingly awesome stuff consuming a ton of our world’s awesome resources we need to consider this will cause a ton of heat and chances are if you are running SLI, quad core, 4GB of ram you will need some extra cooling. There a few options which include liquid cooling and fans. I’ve never messed with liquid cooling, but I want to start playing with it. I heard that you need a water line running into your computer, but that is not confirmed. It is more difficult to set up liquid cooling, but the reduction in sound is amazing! The biggest thing here for me is sound. I hate extremely loud computers.

Recommendations: Now that you have an awesome computer DON’T RUIN IT!!! You know for a fact this computer is fast, and it runs extremely well so you have excuse. Don’t install tons of random software from the internet and if you do make sure to delete it after you are no longer using it. Also run Spy Bot Search and Destroy. Make it your best friend. It is very nice. Anti-virus is good, but in this day and age i feel it is a little unneccisary and I feel like it is a little too hyped up.

Also you may want to consider getting a few hard drives for different purposes. If you get multiple hard drives and use one to store media then chances are it won’t be damaged during a hard drive crash. You could do the same with all your programs that way if XP, Vista or some other OS dies on you, you may just reinstall the operating system but have all your data and programs. Try formatting these hard drives to Fat 32 rather than NTSC so you can use them across many operating systems. Speaking of operating systems… At this point you may also wan’t to consider trying out Linux or Hackintosh!

If you have questions about any of this stuff or need more advice. Post a comment and I will get back to you for sure :).

Share
24Jun

I suppose I’ll use this as my first post since it is the coolest thing I’ve done in the past week or two (in my opinion).

So [noROBOT] was low on cash (we had about $300.00), and we needed at least 3-5 microphones. One of which was a yamaha subkick. I voted against buying it since I thought $370.00 wasn’t worth it for the microphone. I really wanted that heart pounding bass drum sound though. So after some research online I found out that a bunch of people made their own “subkicks” based on the yamaha design. Truth be told, yamaha stole the idea from the DIY subkick creators actually.

HISTORY TIME:

In the past there was this nifty speaker made by Yamaha called the NS10. This bad boy picked up the lows of the lows. So someone out there discovered that it would be super useful to pick up bass drum frequencies. After this started catching on throughout the forum world Yamaha started to discontinue the NS10 and shortly after the Yamaha Subkick went on sale for the nifty price of $370.00 US.

The Jeff and Parris Method:

For those of you that don’t know him, Jeff is the drummer of [noROBOT] woo! Him and I decided to create the most amazing subkick ever. So we went down to “Music Go Round” bought a 30 dollar tom shell which was 12 inches, and I decided to pull my 10 inch bass speaker out of my old bass amp. We mounted the speaker into the tom with L shaped hinges that didn’t bend (we had to use a hacksaw to get it to fit just right) then we stripped down a standard XLR cable on the female end and wired it up to the speaker. The first version got the job done, but it didn’t sound like what we wanted. Definitely not earth shattering. I talked to Tim over at Earcandycabs.com about speakers and he set me on the right path. After researching about several different 10 inch speakers, I settled on the Eminence Legend BP102 10 inch bass speaker which has a usable frequency range from 40hz-2khz which makes it perfect for picking up those sounds you can only feel but not hear. This one seems to have gotten the job done. At first we had a tom head covering the speaker, but it made the bass drum sound boomy, as if we were hitting both the tom and the bass drum simultaneously; however, we removed it and it sounds great. We are currently recording drums with 12 microphones. A ton of SM57s (even for overhead) then 3 mics on the bass drum (akg d100 on the beater with a shure 52 and the subkick on the front). With the money we saved we also bought an Audio Technica AT3031 for the high hat and a Shure beta 57a on the top of the snare. I had a senheiser e609 guitar mic which we placed under the snare which sounds really awesome also. 🙂 Sound clips up soon!

Future Upgrades and Other Info:

The microphone signal is currently way too hot. I had a 20db outline pad in the form of the Tube Pre from Presonus. Apperently even the subkick from yamaha needs something like this to be used properly. I also read that the Yamaha subkick has no resistors or anything of that sort. It is simple a 6 inch speaker with a cable plugged into it. We decided however to go a step further. We are adding a crossover and lpad to add resistance and have a sort of level control completely built into our subkick itself. This will eliminate the need of using a preamp to pad it. Also most people in the forums have been saying 6-8 inch speakers are ideal to creating something like this and that any ol run of the mil speaker will work. I will disagree with them completely. 6-8 inches will work, but the only thing size relates to is clarity. The most important factor about finding a speaker is the range of tones it can output. Ours was 40hz-2Khz which is perfect as mentioned before. The reason being that 40hz is the lowest possible recording frequency and people start rolling off at 32hz. So if you guys can find a speaker that will do this for you I say go for it, have fun and save some money.

By the way I am no pro. I have learned the above by talking to people and experimenting. Hope it helps someone out!

Parris

Share